938272-5001S GARRETT Supercore G-Series II G40-1000 ( Storsäljare )

G-Series II G40-1000 Supercore Standard Rotation 62MM Comp Ind

Product Description
Whether you’re a kit maker or  an owner of a high-performance vehicle, now you can harness the power  of motorsport legends and experience the durability of champions in your  car with the NEW G-Series II universal Performance Turbos line from  Garrett. Designed with the same quality and craftmanship that has  powered motorsport legends for over 4 decades. G-Series II turbochargers  are available in multiple frame sizes to suit your individual needs,  whether as a complete new turbo or as a CHRA swap to upgrade your  G-Series I Turbo.

Key Features:

• G-Series II G40-1000 Supercore
• New compressor aero technology increases power and performance, with  up to 10% higher compressor flow compared to G-Series Gen I at peak  pressure ratio and peak turbo RPM
• Direct upgrade path for Gen I owners with just a CHRA swap. G-Series II utilizes Gen I compressor and turbine housings
• Engine calibration required to take advantage of increased flow for a horsepower upgrade
• 62mm Compressor Inducer | 88mm exducer
• Increased efficiency at high flow rates
• Inconel alloy turbine wheel
• Water fittings included

Warning
Maximum Allowable Turbocharger Speed Is  125 KRPM. The Use Of This Product Above Max Turbocharger Speed Is At The  Owner's Risk, And Can Result In Damage And Premature Failure. To  Protect The Turbocharger From Overspeed When Operating, A Speed Sensor  Can Be Installed Into The Compressor Housing To Monitor Shaft Speed.  Sensors Sold Separately.

Performance Results Of This Product Are  Highly Dependent Upon Your Vehicle's Modifications And  Tuning/Calibration. The Horsepower Numbers Represented Above Are  Calculated Based Strictly On Choke Flow Of The Compressor Map (Total  Turbo Capability), Which Represents The Potential Flywheel Horsepower.

Product Specifications

Engine Characteristics

• Min HP: 500
• Max HP: 1000
• Min Displacement (L): 2.0
• Max Displacement (L): 6.0
• Important Product Information: Garrett Performance  Kits are professional aftermarket products only designed for certain  racing vehicles driven on particular racing tracks and shall only be  used on racing vehicles that will never be driven on public roads or  highways. Garrett Performance Kits are not legal for the use in vehicles  on public roads or other roads to which public road law applies. Any  vehicle modifications using Garrett Performance Kits are AT YOUR OWN  RESPONSIBILITY and AT YOUR OWN RISK. Only use Garrett Performance Kits  in compliance with all applicable laws, regulations, and ordinances  (including but not limited to emission, noise, operating license,  performance, safety, and type-approval aspects). A vehicle modification  using Garrett Performance Kits may particularly affect or void a  vehicle’s warranty, operating license or type-approval. Moreover, only  use Garrett Performance Kits in compliance with all applicable racing  and racing track provisions. It is YOUR OWN RESPONSIBILITY AND RISK to  ensure that your Garrett Perform

Compressor Wheel Specs

• Compressor Exducer (mm): 62
• Compressor Wheel Mat: Forged Fully Machined
• Compressor A/R: 0.80

Turbochargers

• Product Line: G-Series II
• Frame Size: 40
• Rotation: Standard
• Cooling: Oil & Water Cooled
• Bearing: Ceramic Dual Ball Bearing