757707-0037 Garrett G38 Turbinhus / Avgashus  0.85 A/R V-Band

757707-0037 Turbine housing for G38-1000 with V-Band inlet and outlet

G38 turbine housing with VBand turbo flange and VBand downpipe flange and 0.85ar

Garrett turbine housing, suitable for all G38-1000 turbochargers and Supercores.

 Turbine housing inlet flange: V-Band
Turbine housing outlet: V-Band
A/R value: 0.85

Fits for turbine wheel:
Inlet:  74,00mm
Oulet: 66,00mm
Trim: 84

For turbochargers: Garrett G38-1000

GENERAL GARRETT G SERIES TURBOCHARGER DESCRIPTION

Compressor:
All G compressor wheels are CFD designed, forged and milled from  special, high strength aluminum alloys. The new G-Series compressor  wheels achieve up to 30% more flow than the GTX Gen II compressor  wheels.

Compressor housing:
The new aero-optimized high-flow compressor housings with integrated  mounting for optional speed measuring sensors are adapted to the new  G-series compressor wheels. The generation I improved recirculation  systems have been adopted in the G-Series and significantly extend the  operating range of the compressor by shifting the surge line.

Cartridge:
All Garrett G CHRA's are equipped with 4-port water cooling. So 2  connections can be selected on each side. This considerably facilitates  the installation of the water pipes and hoses. And of course the  G-Series comes with a double ceramic ball bearing like the Gen II. New  is the double piston ring seal on both sides.

Turbine:
The new tubrine wheels are made of the high-performance material Mar-M.  This material withstands exhaust gas temperatures up to 1050° C. Here  too 75% more exhaust gas flow was achieved with the same wheel  dimensions compared to the GTX turbocharger.

Turbine housing:
The turbine housings are cast from a special stainless steel alloy which also withstands up to 1050° C.

När det kommer att räkna ut rätt A/R på turbinhuset så har vi mångårig erfarenhet & hjälper gärna både privatkunder,Återförsäljare osv att räkna ut. 

Maila in till [email protected] för support.